text.skipToContent text.skipToNavigation
  • /_ui/responsive/common/custom/images/default-supplier-banner-1.jpg
  • /_ui/responsive/common/custom/images/default-supplier-banner-2.jpg
  • /_ui/responsive/common/custom/images/default-supplier-banner-3.jpg
  • /_ui/responsive/common/custom/images/default-supplier-banner-4.jpg
  • /_ui/responsive/common/custom/images/default-supplier-banner-5.jpg

SCOTT BADER

พบสินค้า 6 ชิ้น

คําขอตัวอย่าง
รายละเอียดการติดต่อของผู้ร้องขอ
ชื่อเต็ม
บริษัท
ฐานะ
หมายเลขโทรศัพท์
ที่อยู่อีเมลที่ทํางาน
ที่อยู่จัดส่ง

Thank you. Your request has been sent.

TEXIPOL®63-513

TEXIPOL®63-513 is a next-generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content which imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralized dispersion as the sodium salt of an acrylic-based polymer. It has broad pH compatibility (4-12).

TEXIPOL® 63-510

TEXIPOL® 63-510 is an inverse emulsion thickener that imparts highly pseudoplastic rheology to aqueous-based compositions. It is supplied as a pre-neutralized dispersion as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2-12. It can thicken both acidic and alkaline compositions and gives stable thickening in various organic acids such as citric and glycolic acid. It will also thicken phosphoric acid effectively. Thickening is normally achieved quite quickly, but in stronger acid and alkaline environments, maximum thickening may take somewhat longer. TEXIPOL® 63-510 has been used to thicken various water-based adhesives and coating systems where it gives an exceptionally creamy consistency. It has also been possible to thicken aqueous blends with N-methylol pyrollidone and other polar solvents. Typical thickener dosages are 0.5-2.0%, though this is system-dependent and higher paste viscosities may require higher addition levels.

TEXIPOL®63-202

TEXIPOL®63-202 is an inverse emulsion thickener that imparts pseudoplastic rheology to aqueous-based compositions. TEXIPOL 63-202 can be used to thicken a wide variety of aqueous binder systems including; PVA, VAE, SBR, PVdC, and acrylic and styrene-acrylic copolymers. It has been used in various adhesive, sealant, and coating formulations. It can thicken systems as low as pH 5 but is most efficient at pH>7. Typical thickener dosages are probably 0.5-2.0%, though this is system-dependent and higher paste viscosities may require higher addition levels.

TEXICRYL® 13-540

TEXICRYL® 13-540 เป็นการกระจายตัวของน้ําอะคริลิกโคพอลิเมอร์สไตรีนที่มีความยืดหยุ่นและคุณสมบัติการยึดเกาะที่ดีเยี่ยม TEXICRYL 13-540 เหมาะสําหรับใช้เป็นสารยึดเกาะหลักในการเคลือบเมล็ด

ปริมาณสินค้าได้รับการปรับปรุง