CPHI SEA 2022

EFFER-SODA® SODIUM BICARBONATE, is a highly stable, surface modified sodium bicarbonate powder developed for use in pharmaceutical and nutraceutical applications.Show Less

Sorbitol Special™ plasticizers are sorbitan-sorbitol based soft gel plasticizers. They enhance the capsule finish gloss for a premium appearance, help to prevent leakage, provide consistent pharmaceutical quality, and extend shelf life by maintaining a proper moisture balance within the capsule shell. Sorbitol Special™ products are manufactured from commercial corn syrups.

Show Less

Simethicone is an orally administered antifoaming agent. It is mainly used to reduce gas from the gastrointestinal tract (GIT) in patients complaining from recurrent flatulence. Simethicone is a mixture of polydimethylsiloxane and hydrated silica gel.Show Less

CALCIUM CARBONATE DC is a highly compactable, porous calcium carbonate with smooth organoleptics, CS90/CS90L is ideal for antacid formulations and nutritional supplements, especially where tablet weight is a concern.Show Less

LUBRIPHARM® SSF Sodium Stearyl Fumarate (SSF) is an inert, less hydrophobic alternative to magnesium stearate as a pharmaceutical tablet lubricant. Tablets made with Lubripharm SSF exhibit less sensitivity to variations in blending time and lubricant levels and have functionally superior hardness characteristics compared to tablets produced with magnesium stearate. In addition, Lubripharm SSF does not exhibit incompatibility with active pharmaceutical ingredients (APIs) that are susceptible to oxidation or degradation in alkaline conditions or contain primary amines.Lubripharm® SSF is manufactured from natural and synthetic sources; no animal products are used.Show Less

Pharmaburst 500 produces fast disintegrating tablets that are hard enough to withstand the mechanics of production, storage, transportation, and being pushed out of a blister pack, yet will disintegrate rapidly so the patient can swallow their medication comfortably.Show Less

Barcroft™ Magnesium Hydroxide is precipitated from seawater. It is pure and free of contaminants typical of chemically derived magnesium products. LVM magnesium paste is recommended for extra strength products where a suspending agent is employed. Magnesium hydroxide paste is the product of choice for liquid antacids and saline laxatives (MOM). • pasteurized to assure quality • produced under cGMP conditions • broad range of viscosities to meet production and market requirements • produces creamy finished product • low lead product meets USA’s California Proposition 65 standardsShow Less

MANNOGEM EZ SPRAY DRIED is the proprietary process used to manufacture Mannogem EZ Spray Dried - Mannitol yields a porous material with lower disintegration times, a narrow particle size distribution, enhanced flow, and compression properties. It is due to these properties that Mannogem EZ is excellent in ODT formulations. It produces tablets with higher hardness than other excipients at comparable compression forces, and its higher surface area allows Mannogem EZ to work well as a base for ordered mixing with micronized APIs and low dose formulations. Mannogem® Mannitol products are manufactured from sugar cane or from corn starch/syrup.

Show Less

MANNOGEM XL, an innovative approach to mannitol designed to improve the formulation experience and enhance formulation performance.

Show Less

Barcroft ™ Aluminium Hydroxide Gel Visco-9 has a fine and narrow particle size distribution resulting in a pleasant mouthfeel. Viscous pastes yield thick and creamy formulations without the need for additional thickeners or suspending agents. Viscous aluminium hydroxide products are typically used in regular strength antacid suspensions. The products provide the appropriate thickness without requiring the use of gums or suspending agents. These gels can be dumped from drums with suitable equipment or pumped from the drum with specially designed pumps.Show Less

DC Co-Dried powders AHMH 3535 are preformulated products for a simpler, quicker, and more cost-effective manufacturing process for immediate-relief antacid tablets.Show Less

PRIMECEL PH 101 is microcrystalline cellulose and mainly used as filling, binding and blasting material for tableting as well as for dry and wet granulation. It is white or almost white, fine or granular powder. High brightness with low dark particle counts (Limited warranted on COA). Particle size 50 micron.Show Less

PRIMECEL PH 102 is microcrystalline cellulose and a direct compression excipient and fiber source for pharmaceutical oral dosage and nutraceutical. It is also suitable for dry granulation. It is white or almost white, fine or granular powder. High brightness with low dark particle counts (Limited warranted on COA). Particle size is 100 micron.Show Less

FEF® BENZALKONIUM CHLORIDE is also known as BZK, BKC, BAK, alkyl dimethyl benzyl ammonium chloride and ADBAC. Our FeF Benzalkonium Chloride products have proven efficacy against a broad spectrum of microorganisms (gram + and – & acid fast bacteria, yeast, moulds, enveloped viruses). They are effective through a wide pH range, are surface active/adhesive cationic agents and do not add unpleasant odour/colour to finished formulations. Benzyl (dodecyl) dimethyl ammonium chloride (approx. 65%), Benzyl (tetradecyl) dimethyl ammonium chloride (approx. 35%). Approx. 50% active ingredients.

Show Less

HDK® N20 Pyrogenic Silica is applied as a thickening and thixotropic agent in many organic systems and it’s a Standard product for industrial applications—synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

Show Less

SODIUM CARBOXYMETHYL CELLULOSE is a cellulose derivative with carboxymethyl groups (-CH2-COOH) bound to some of the hydroxyl groups of the glucopyranose monomers that make up the cellulose backbone. It is often used as its sodium salt, sodium carboxymethyl cellulose.Show Less

galenIQ™ 720 is a white or almost white powder or granules, freely soluble in water and practically insoluble in ethanol.Show Less

galenIQ™ 721 is a white or almost white powder or granules, freely soluble in water and practically insoluble in ethanol.Show Less

Captex 355 EP/NF/JPE increase solubility and bioavailability of API. Medium-CHAIN: Triglycerides EP; Medium-Chain Triglycerides USP/NF; Medium-Chain Fatty Acid Triglyceride JPEShow Less

FEF® BENZALKONIUM CHLORIDE SOLUTION 50% is also known as BZK, BKC, BAK, alkyl dimethyl benzyl ammonium chloride and ADBAC. Our FeF Benzalkonium Chloride products have proven efficacy against a broad spectrum of microorganisms (gram + and – & acid fast bacteria, yeast, moulds, enveloped viruses). They are effective through a wide pH range, are surface active/adhesive cationic agents and do not add unpleasant odour/colour to finished formulations. Benzyl (dodecyl) dimethyl ammonium chloride (approx. 65%), Benzyl (tetradecyl) dimethyl ammonium chloride (approx. 35%). Approx. 50% active ingredients.

Show Less

HYDROXYPROPYL METHYL CELLULOSE (Headcel®60HD5) is low-viscosity Hydroxypropyl Methyl Cellulose (HPMC) which is designed for using in a wide range of pharmaceutical applications.Show Less

HYDROXYPROPYL METHYL CELLULOSE (Headcel®60HD15) is low-viscosity Hydroxypropyl Methyl Cellulose (HPMC) which is designed for using in a wide range of pharmaceutical applications.Show Less